|
Corrugated
S/NVQs > Level
2
Print & Graphic
Communication NTO - Fibreboard Manufacture & Conversion Units
FB452
Contribute to the fibre board manufacturing process
FB452.1
Contribute to the making ready of the wet end process
You
must show that you:
| 1 |
Check
that you have all the details required for the job |
| 2 |
Assist
in the checking of materials for the job |
| 3 |
Promptly
report to your manager if the materials provided is not correct
or sufficient |
| 4 |
Work
safely following the safe working practices |
| 5 |
Assist
in the preparation of materials for production |
| 6 |
Assist
in making ready the single facers or double backer stations
so that:
- steam pressures are correct
- flutes are formed correctly
- adhesion is adequate
|
| 7 |
Promptly
report mechanical faults |
| 8 |
Assist
in the identification of unused materials |
You
must understand:
| K1 |
What
details you need for your job
|
| K2 |
The
sequence of tasks for preparing and loading materials |
| K3 |
The
principles of fibreboard processes |
| K4 |
The
risks associated with preparing and loading materials and how
to avoid them |
| K5 |
The
types of materials and their uses |
| K6 |
What
the common paper faults are, what causes them and how to avoid
them |
| K7 |
The
material identification systems |
| K8 |
The
company quality standard |
| K9 |
The
procedures for removing wet end set up waste
|
Performance evidence
You must show that
you can contribute to the make ready of the wet end process consistently
over a period of time.
Your evidence must
show:
| R1 |
You assist in obtaining the following
materials:
|
| R2 |
You confirm that the process is ready for production
by:
- Visual examinations
- Checking
the settings
|
| R3 |
You
check the papers for:
- Correct
type
- Required
standard
|
>Return
to level 2
|
